Making A Go-Cart With Mr Gormly

 

How To Make A Go-Cart

Yesterday we made a go cart. Miss Gormly’s dad came to help us to make the go-cart.

First we took the tools out of the box. We had a wrench, a hammer, strew driver, pliers, wheels and axles.

Then we got a seat. We got the wood. Mr Gormly got the drill and made 6 holes. 

Then we put the screws in. We got another seat. We put the seats together. We got more wood. Then we drilled a hole. We screwed it in. We put the wheels in, washers in, then we put the strings on. 

I felt happy because we made the go-cart.

By Martha

How To Make A Go-Cart

First we met Mr Gormly with the tool box. We put it on the table and then we pulled out all the tools. Then we were learning from Mr Gormly what tools we can use for the go-cart. 

Next we got matching pieces of wood and got a flat piece then we drilled some holes so we could screw it together.  The flat piece is called the base.

Then we did the same thing to the back.

Then we got the axles and wheels. We put the wheel on, then the axles. Then we put the wheel after the washer. Then after the washer we put on the split pin and twisted it.

By Esekiel

We are learning how to make a go-cart. We got a screwdriver, got some screws and we got the base. 

First we took turns and everyone was happy to help Mr Gormly. It was fun.

Then we got the base, then drilled some holes on the base. Then we all screwed the base to make it. It moved and turned. 

First we put the wheels on the axle. Then he did a bit himself. 

It was done.

We tried it out. Everyone was happy.

By Krypton

We built the go-cart.

I drilled holes

By Trevor